Design Tips

Multicolour 3D Printing: How AMS Colour Prints Work

How multicolour FDM 3D printing works with an AMS, what designs suit it, how to prepare your file, and why colour changes affect print time and cost.

Laser 3D Print5 min read

On this page

Most 3D prints you see online are a single colour, then painted afterwards. That works, but it is not the only option. On a printer with an automatic material system (AMS), several spools can feed one print, so a logo, sign or figurine can come off the bed already in colour. This guide explains how it works, which designs suit it, and how to prepare a file so the colours land where you want them.

How an AMS multicolour print works

An FDM printer builds a part by melting filament through a single nozzle, layer by layer. With an AMS, several spools sit in a unit connected to the printer. When the slicer says a colour change is due, the printer pulls the current filament back, loads the next one and pushes out a small amount of material to clear the old colour from the nozzle before carrying on.

At Laser 3D Print we run a Bambu Lab P2S Combo with AMS, so colour swaps are handled in the machine rather than by pausing and swapping spools by hand. That makes it practical to change colour many times in one print, not just once or twice.

There are two common ways colour is used:

  • Colour by height. Each colour starts at a certain layer, which is ideal for raised lettering on a base, layered signs and badges.
  • Colour by region. Different areas on the same layer use different colours, such as the eyes and clothing on a figurine. This needs more swaps, so it takes longer.

What designs suit multicolour FDM

Multicolour printing shines when colours are separated by clear edges. Good candidates include:

  • Business logos, name plates and desk signs
  • Keyrings, badges and tags
  • Simple figurines and characters with blocky colour areas
  • Labels and markings on functional parts, like arrows or numbers on a jig
  • Presentation models and prototypes where colour helps explain the design

It is less suited to photo-realistic gradients, tiny painted details or soft blended shading. FDM colour changes are sharp steps, not airbrushed fades, and very small colour islands can look rough at normal nozzle sizes. For those, a single-colour print finished with paint is often the better route.

Preparing a file for a multicolour print

The printer needs to know which parts of the model are which colour. You can supply that in a few ways.

Send a 3MF with colours assigned

A 3MF file can carry colour or material assignments, so it is the cleanest option if your design software supports it. Our guide to STL vs OBJ vs 3MF covers the differences between formats.

Send separate STLs per colour

If you design in a tool that only exports STL, export one STL per colour from the same project so they share the same origin and line up perfectly. Name each file after its colour.

Start from an image

Many people only have a logo or drawing as a PNG or JPG. In that case our Convert 2D to 3D service can turn the image into a 3D model first. Simple, high-contrast artwork with few colours converts and prints far better than detailed photos.

Design tips that help

  • Keep each colour area big enough to read at the final size; very thin outlines tend to disappear.
  • Raise or recess lettering by at least a few layers so the colour change has room to show.
  • Limit the palette. Fewer colours means fewer swaps, less waste and a faster print.
  • Put colour changes on flat, horizontal steps where you can, rather than on curved surfaces.

Time, waste and cost

Every colour change takes time and pushes out some filament to clear the nozzle. A model that swaps colour on every layer can take noticeably longer than the same model in one colour, and it uses more material overall.

That is why multicolour is a separate option in our pricing. When you tick multicolour in the instant quote calculator, it adds 30% to the material cost. For a print with lots of swaps, we may suggest small changes, such as grouping colours by height, that keep the look while cutting print time.

Materials matter too. Mixing filaments with different printing temperatures in one part can cause poor bonding between colours, so multicolour prints usually use the same material type in different colours. If you need a specific combination, mention it in your order notes and we will confirm whether it will work.

Wrapping up

Multicolour FDM printing is a great fit for logos, signs, badges and simple characters where clean colour edges matter. Keep the palette small, make colour areas a readable size and send a 3MF or one STL per colour. If all you have is a picture, start with Convert 2D to 3D, then get a print quote once the model is ready.

Frequently asked questions

Can you print my logo in more than one colour?

Often, yes. Flat logos, signs and badges are some of the best fits for multicolour FDM printing, because each colour can sit on its own layers or regions. If you only have the logo as an image, our Convert 2D to 3D service can turn it into a printable model first.

Does multicolour printing cost more?

Yes. Selecting multicolour adds 30% to the material cost in our quote, because the printer purges filament on every colour change and the print takes longer. The instant quote calculator shows the difference when you tick the multicolour option.

Do I need a special file for a multicolour print?

It helps. A 3MF file can keep colour assignments, or you can send each colour as a separate STL that lines up. If you only have one STL, tell us which areas should be which colour and we will check whether it can be split sensibly.

  • #multicolour 3D printing
  • #AMS
  • #Bambu Lab
  • #logo 3D printing
  • #FDM printing
  • #Sydney
  • #Australia
Convert 2D to 3D

Only have a photo or drawing?

Send us an image and we'll turn it into a 3D model you can preview online before you pay.