Guides
How Much Does 3D Printing Cost in Australia? What Drives Price
What actually sets the price of a 3D print in Australia: weight, material, colours, setup and shipping. See how our instant quote works it out.
Laser 3D Print4 min read
On this page
If you've ever asked a print shop "how much to 3D print this?" and got "it depends", this guide explains what it actually depends on. We'll walk through the factors that drive the price of an FDM (filament) print and show exactly how our own instant quote calculator puts a number on your part.
The short answer: it mostly comes down to weight
For FDM printing, the biggest driver of cost is how much plastic goes into the part. More material means more filament and more machine time. That's why most quotes, including ours, are built around the estimated weight of the print in grams.
If you don't know the weight, you can still get a price. Our calculator estimates it from the part's length, width and height. It works out the bounding-box volume, then assumes the part fills about half of that box, is printed at 20% infill, and uses a PLA-like density. It's an estimate, not a slicer result, but it gets you in the right ballpark in seconds.
Size limits matter too
Every printer has a maximum build size. We print on a Bambu Lab P2S, so each dimension needs to be 256 mm or less. Bigger items can often be split into parts and joined. Get in touch through our contact form if your project is larger.
What else changes the price
Weight is the base, but a few other choices move the number up or down.
Material
We print in PLA, ABS and carbon fibre filament. PLA and ABS share the same standard per-gram rate. Carbon fibre is charged at twice that rate, because the filament costs more and is used for parts that need extra stiffness. If your part is decorative, a prototype or a light-duty bracket, PLA or ABS is usually the sensible choice.
Multicolour
Printing in several colours takes extra time and creates extra waste as the printer swaps filament. In our calculator, multicolour adds 30% to the material cost. Single colour is always the cheaper option.
Quantity and bulk
Heavier jobs get a better rate. The first 200 g is charged at the full material rate, and every gram after that is charged at half rate. So one large part, or a batch of parts printed together, works out cheaper per gram than lots of small separate orders.
The fixed costs on every order
Two parts of the quote don't change with the size of your print:
- Setup: a flat fee to cover preparing your file, slicing it and getting the printer ready.
- Shipping: a flat delivery fee added to the order.
This is why a tiny keyring can feel expensive compared to the plastic in it. Most of its price is the fixed setup and delivery, not the material. Combining several small items into one order is the easiest way to get more value.
How to keep your 3D printing costs down
A few practical tips that genuinely lower the price:
- Scale to what you need. Because weight grows with volume, a part that's 20% smaller in every direction uses roughly half the plastic.
- Choose PLA or ABS unless you need carbon fibre. It halves the material rate.
- Stick to one colour when appearance isn't critical.
- Batch your parts. One order means one setup fee and one shipping fee, and heavier jobs get the bulk rate.
- Start with a ready-made design. If you don't have a 3D file, browse our 3D models or pick an item from our ready-to-buy prints instead of paying for custom design work.
Don't have a 3D file yet?
Lots of people come to us with only a sketch, logo or photo. Our Convert 2D to 3D service turns a 2D image into a printable model, which you can then send straight into a print quote.
Get your price in under a minute
There's no need to guess. Enter your part's dimensions, pick a material and choose single or multicolour in our instant quote calculator. You'll see the full breakdown, setup, material, any multicolour surcharge and shipping, plus an estimated completion date, before you commit to anything.
Frequently asked questions
Why does a bigger part cost more even if it's mostly hollow inside?
Price follows the plastic used, and bigger outer dimensions usually mean more walls, top and bottom layers and infill. Our calculator estimates weight from the part's bounding box using a typical 20% infill, so a larger box means a higher estimated weight.
Is carbon fibre much more expensive than PLA or ABS?
Carbon fibre filament is charged at double the per-gram rate of standard PLA or ABS in our calculator, because the material itself costs more. For parts that don't need extra stiffness, PLA or ABS is the better-value choice.
Do I pay less per gram for large prints?
Yes. In our pricing, the first 200 g is charged at the full material rate and every gram above that is charged at half rate, so heavier parts get cheaper per gram.
- #3D printing cost
- #3D printing price Australia
- #FDM printing
- #Sydney
Ready to print your part?
Upload your STL, OBJ or 3MF and get an instant price. Printed in Sydney and shipped Australia-wide with flat-rate shipping.